Graco EcoQuip 2
Dual Line
To mann kan blåse samtidig med Dual Line!
Gracos EcoQuip EQs Dual Line er designet for å enkelt kunne transporteres rundt arbeidsplasser med tilgjengelige gaffeltrucklommer samt løftekroker for luftmobilitet. Dette er perfekt for steder med trykkvannskilde. Denne Vapor Abrasive blasteren har to uttak og en stor blåseklokke som kan blåse opptil fire timer med to mann samtidig. Få raskt igang prosjektet med denne høyproduksjonsmaskinen.
- En blåseklokke på 1240 kubikk ft inneholder omtrent 25 kg poser medier
- Tilgjengelige gaffeltrucklommer og løftekroker for enkel transport rundt en arbeidsplass
- Enkel kontrollboks med enkelt brukergrensesnitt for enkel kontroll
- Helbelagt ramme som har en slitesterk, sveiset design for robuste miljøer
- Ubegrenset fylling som åpner for 2x raskere lasting enn vanlig skidmodell
Technical Specifications
Convert to Imperial| Abrasive Capacity (lb) | 1400 |
|---|---|
| Air Inlet Size (in) | 2 |
| Air Inlet Thread Type | NPT |
| Blast Hose Coupler 1 Material | Brass |
| Blast Hose Coupler 1 Type | Nozzle Holder |
| Blast Hose Inside Diameter (in) | 1-1/4 |
| Blast Hose Length (ft) | 50 |
| Compatible Abrasives | Garnet, Crushed Glass, Coal Slag, Glass Beads, Plastic, Walnut Shells, Baking Soda |
| Configuration | Skid |
| Control Type | Pneumatic |
| Dry Weight (lb) | 1400 |
| Enclosure Material | Coated |
| Frame Material | Coated |
| Frame Type | Skid/Crash Frame |
| Maximum Operating Temperature (°F) | 110 |
| Maximum Working Pressure (MPa) | 1 |
| Maximum Working Pressure (psi) | 150 |
| Minimum Operating Temperature (°F) | 35 |
| Nozzle Type | #8 High Performance |
| Pot Capacity (ft³) | 12 |
| Pot Capacity (gal) | 90 |
| Pot Finish/Coating | A-Coat/Powder |
| Recommended Compressor Size (CFM) | 750-1600 |
| Standards Met | ATEX Approved |
| Type | Abrasive Blast System |
| Unit Type | High Production Unit |
| Water Tank Material | Polyethylene |
| Water Tank Type | No Water Tank |
| Water Tank Volume (gal) | 115 |
| Wet Weight (lb) | 4200 |
| Air Inlet Size (cm) | 5.08 |
| Air Inlet Size (mm) | 50.8 |
| Air Inlet Thread Type | NPT |
| Blast Hose Coupler 1 Material | Brass |
| Blast Hose Coupler 1 Type | Nozzle Holder |
| Blast Hose Inside Diameter (mm) | 31.75 |
| Blast Hose Length (m) | 15 |
| Compatible Abrasives | Garnet, Crushed Glass, Coal Slag, Glass Beads, Plastic, Walnut Shells, Baking Soda |
| Configuration | Skid |
| Control Type | Pneumatic |
| Enclosure Material | Coated |
| Frame Material | Coated |
| Frame Type | Skid/Crash Frame |
| Maximum Operating Temperature (°C) | 43.3 |
| Maximum Working Pressure (MPa) | 1 |
| Maximum Working Pressure (bar) | 10.3 |
| Maximum Working Pressure (kPa) | 1030 |
| Maximum Working Pressure (kg/cm²) | 10.55 |
| Minimum Operating Temperature (°C) | 1.6 |
| Nozzle Type | #8 High Performance |
| Pot Capacity (L) | 340 |
| Pot Finish/Coating | A-Coat/Powder |
| Recommended Compressor Size (CFM) | 750-1600 |
| Standards Met | ATEX Approved |
| Type | Abrasive Blast System |
| Unit Type | High Production Unit |
| Water Tank Material | Polyethylene |
| Water Tank Type | No Water Tank |
Technical Specifications
Convert to Imperial| Abrasive Capacity (lb) | 1400 |
|---|---|
| Air Inlet Size (in) | 2 |
| Air Inlet Thread Type | NPT |
| Blast Hose Coupler 1 Material | Brass |
| Blast Hose Coupler 1 Type | Nozzle Holder |
| Blast Hose Inside Diameter (in) | 1-1/4 |
| Blast Hose Length (ft) | 50 |
| Compatible Abrasives | Garnet, Crushed Glass, Coal Slag, Glass Beads, Plastic, Walnut Shells, Baking Soda |
| Configuration | Skid |
| Control Type | Pneumatic |
| Dry Weight (lb) | 1400 |
| Enclosure Material | Coated |
| Frame Material | Coated |
| Frame Type | Skid/Crash Frame |
| Maximum Operating Temperature (°F) | 110 |
| Maximum Working Pressure (MPa) | 1 |
| Maximum Working Pressure (psi) | 150 |
| Minimum Operating Temperature (°F) | 35 |
| Nozzle Type | #8 High Performance |
| Pot Capacity (ft³) | 12 |
| Pot Capacity (gal) | 90 |
| Pot Finish/Coating | A-Coat/Powder |
| Recommended Compressor Size (CFM) | 750-1600 |
| Standards Met | ATEX Approved |
| Type | Abrasive Blast System |
| Unit Type | High Production Unit |
| Water Tank Material | Polyethylene |
| Water Tank Type | No Water Tank |
| Water Tank Volume (gal) | 115 |
| Wet Weight (lb) | 4200 |
| Air Inlet Size (cm) | 5.08 |
| Air Inlet Size (mm) | 50.8 |
| Air Inlet Thread Type | NPT |
| Blast Hose Coupler 1 Material | Brass |
| Blast Hose Coupler 1 Type | Nozzle Holder |
| Blast Hose Inside Diameter (mm) | 31.75 |
| Blast Hose Length (m) | 15 |
| Compatible Abrasives | Garnet, Crushed Glass, Coal Slag, Glass Beads, Plastic, Walnut Shells, Baking Soda |
| Configuration | Skid |
| Control Type | Pneumatic |
| Enclosure Material | Coated |
| Frame Material | Coated |
| Frame Type | Skid/Crash Frame |
| Maximum Operating Temperature (°C) | 43.3 |
| Maximum Working Pressure (MPa) | 1 |
| Maximum Working Pressure (bar) | 10.3 |
| Maximum Working Pressure (kPa) | 1030 |
| Maximum Working Pressure (kg/cm²) | 10.55 |
| Minimum Operating Temperature (°C) | 1.6 |
| Nozzle Type | #8 High Performance |
| Pot Capacity (L) | 340 |
| Pot Finish/Coating | A-Coat/Powder |
| Recommended Compressor Size (CFM) | 750-1600 |
| Standards Met | ATEX Approved |
| Type | Abrasive Blast System |
| Unit Type | High Production Unit |
| Water Tank Material | Polyethylene |
| Water Tank Type | No Water Tank |
Ønsker du mer infomasjon om Dual Line?
Send inn kontakt informasjonen din her, så tar vi kontakt med deg.
Takk - din melding er motatt.
Vi vil komme tilbake til deg så snart vi har sett på den.