Graco

XM 70

Nøyaktig forholdsforsikring i et fullt konfigurerbart system

Graco XM Plural Component Sprayer er konstruert for å håndtere de tøffeste beskyttelsesbeleggene, og gir nøyaktig forholdskontroll, slik at brukerne kan laste ned historiske sprøytedata og håndtere et bredt spekter av tokomponentmaterialer.

I hjertet av forholdskontrollen er Gracos avanserte doseringsteknologi. Hovedkomponenten flyter konstant mens den mindre komponenten injiseres ved høyere trykk. Avansert sensorteknologi gjør det mulig for pumper å kompensere for trykkfluktuasjoner, noe som resulterer i nøyaktig forholdsmessig blanding for bedre utbytte og mindre avfall.

Graco XM er perfekt egnet for bruk i marine, bro, jernbane og vindkraft, og kan konfigureres for din spesifikke beleggingsjobb. Start med en baseenhet. Velg deretter det tilbehør du trenger. Du får akkurat det du trenger. Ikke mer. Ikke mindre.

XM Plural-Component Sprayers
Mixed Ratio Range
1:1-10:1 (in 0.1 increments)
Ratio Tolerance Range (before alarm)
+/- 5%
Minimum Flow Rate
0.95 l/min
Maximum Flow Rate
11.4 l/min
Fluid Viscosity Range
200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding)
Fluid Filtration
238 micron, standard on pump outlets (filter assembly not included on some models), Alternative 30 mesh screens included
Air Inlet
3/4 npt(f)
Fluid inlets without feed kits
1 1/4 npt(m)
50:1 Maximum Fluid Working Pressure of mixed material
35.8 MPa/358 bar
70:1 Maximum Fluid Working Pressure of mixed material
43.5 MPa/435 bar
Maximum Fluid Temperature
71° C
Air Supply Pressure Range
0.35-1.0 MPa/3.5-10.3 bar
50:1 Maximum pump air set pressure
0.70 MPa/7.0 bar
70:1 Maximum pump air set pressure
0.62 MPa/6.2 bar
Maximum pump inlet fluid feed pressure
1.7 MPa/17 bar
Maximum Air Consumption
1.96 cu m/min per lpm /at 0.7 MPa, 7.0 bar in cu m/min
Air Filtration
40 micron main filter, 5 micron control air filter
Ambient Operating Temperature Range
0 to 54° C
Ambient Storage Temperature Range
-1 to 71° C
Environmental Conditions Rating
Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 54° C, Pollution Degree (11), Installation category (2)
Sound Pressure
86 dBA at 0.7 MPa, 7 bar
Sound Power
98 dBA at 0.7 MPa, 7 bar
Weight
Base sprayer (XM1A00 and XM5A00 models) 336.87 kg (add component weights to base sprayer weight for your specific model weight)
Wetted parts
Suction Tubes
Aluminum
Flush Pump
Carbide, PTFE, stainless steel, UHMWPE
Hoses
Nylon
Pumps (A and B)
Carbon steel, alloy steel, 303, 440, 17-ph grades stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE
Metering Valves
Carbon Steel, nickel plating, carbide, polyethylene, leather
Manifold
Carbon steel, nickel plating, carbide, 302 stainless steel, PTFE, UHMWPE
Mixer
Stainless steel housing with acetal elements