Graco

Reactor 2 H-XP3

2-komponent pumper for sprøyting av polyuretanskum, polyurea og andre materialer som krever korrekt temperatur, blandingsforhold og trykk.

• For overflatebehandling av betong
• Sprøyting av vannverk
• Sprøyting av fuktsperre
• For sprøyting av sandblåsehaller

Reactor 2 Hydraulic Proportioning System
Maximum Fluid Working Pressure for Bare Proportioners
Models H-XP2 and H-XP3
24.1 MPa, 241 bar
Minimum Fluid Working Pressure for Bare Proportioners
H-XP2
8.2 MPa, 82 bar
H-XP3
5.8 MPa, 58 bar
Fluid: Oil Pressure Ratio
Models H-XP2 and H-XP3
2.79 : 1
Fluid Inlets
Component A (ISO)
3/4 npt(f), 2.07 MPa, 20.7 bar maximum
Component B (RES)
3/4 npt(f), 2.07 MPa, 20.7 bar maximum
Fluid Outlets
Component A (ISO)
#8 1/2 in. JIC, with #5 5/16 in. JIC adapter
Component B (RES)
#10 5/8 in. JIC, with #6 3/8 in. JIC adapter
Fluid Circulation Ports
1/4 npsm(m)
1.75 MPa, 17.5 bar
Maximum Fluid Temperature
 
88° C
Maximum Output (10 weight oil at ambient temperature)
Model H-XP2
5.7 liter/min (60 Hz)
Model H-XP3
10.6 liter/min (60 Hz)
Output Per Cycle (A and B)
Models H-XP2 and H-XP3
0.16 liter
Supply Voltage Tolerance
200–240V nominal, 1 phase
195–264 VAC, 50/60 Hz
200–240V nominal, 3 phase
195–264 VAC, 50/60 Hz
650–415V nominal, 3 phase
338–457 VAC, 50/60 Hz
Amperage Requirement (phase)
See the Models listing in the manual.
Heater Power (A and B heaters total)
See the Models listing in the manual.
Hydraulic Reservoir Capacity
 
13.6 liters
Recommended Hydraulic Fluid
 
Citgo, A/W Hydraulic Oil, ISO Grade 46
Sound Power, per ISO 9614–2
 
90.2 dB(A)
Sound Pressure 1 m From Equipment
 
82.6 dB(A)
Weight
H-XP3,
272 kg
H-XP2, 15 kW
252 kg
Wetted Parts
 
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings