Graco ECOQUIP2
EQs Elite
EcoQuip 2 EQs Elite er bygget for entreprenører som vil ha det beste. Utstyrt med et rustfritt stål krasjramme og kabinett, slangehylle, trinn, mediasyler, vanndosventil og en mediehylle, gjør dette fullt lastede systemet det enkelt å få oppsettet raskere og begynne å tjene penger.
EQs Elite Funksjoner og fordeler
Passer inne i en seks fots lastebil for enkel transport
Stabler lett for å spare plass
Varmtvannstank med slangekobling
Steg og mediehylle for raskere utskriftsmedia
Krasjramme støtter 5x løftevurdering av maskin
6,5 kubikkfot spesialbelagt potte
Gracos sandblåseutstyr betjener et bredt spekter av næringer fra profesjonelt rengjøring, konstruksjon og vedlikehold av tungt utstyr til marine / verft og flyplasser.
| EcoQuip 2 EQs and EQs Elite | |
| Maximum Fluid Working Pressure |
12.1 bar, 1.21 MPa
|
| Operating Temperature |
1.6˚ - 43.3˚ C
|
| Recommended Compressor Size+ |
5.24-25.5 m^3/min
|
| Blast Hose Size (supplied) |
31.75 mm ID
|
| Abrasive Capacity* |
400 kg
|
| Dry Weight |
485 kg
|
| Wet Weight* |
1415 kg
|
| Pressure Pot Volume |
184 liters
|
| Water Tank Volume |
435 liters
|
| Air Inlet Connection† |
– – – – –
|
| * Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense media will decrease weight. | |
| † 2 in. ground boss adapter included in tool box (see the Parts section of the EcoQuip 2 manual for more detail). | |
| Air Supply Hose Minimum ID | |
| 185–600 CFM compressor and less than 100 ft. hose length |
38 mm ID
|
| Over 600 CFM compressor or greater than 100 ft. hose length |
51 mm ID
|
| Sound Data** | |
| Sound Pressure Level |
133 dB(A)
|
| Sound Power Level |
139 dB(A)
|
| Instantaneous Sound Pressure Level |
131 dB(C)
|
| ** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614-2. | |
| + See the Nozzle Selection Guide for information on how to properly select the blast nozzle based on compressor pressure and flow output specifications. | |
| EcoQuip 2 EQs and EQs Elite | |
| Maximum Fluid Working Pressure |
12.1 bar, 1.21 MPa
|
| Operating Temperature |
1.6˚ - 43.3˚ C
|
| Recommended Compressor Size+ |
5.24-25.5 m^3/min
|
| Blast Hose Size (supplied) |
31.75 mm ID
|
| Abrasive Capacity* |
400 kg
|
| Dry Weight |
485 kg
|
| Wet Weight* |
1415 kg
|
| Pressure Pot Volume |
184 liters
|
| Water Tank Volume |
435 liters
|
| Air Inlet Connection† |
– – – – –
|
| * Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense media will decrease weight. | |
| † 2 in. ground boss adapter included in tool box (see the Parts section of the EcoQuip 2 manual for more detail). | |
| Air Supply Hose Minimum ID | |
| 185–600 CFM compressor and less than 100 ft. hose length |
38 mm ID
|
| Over 600 CFM compressor or greater than 100 ft. hose length |
51 mm ID
|
| Sound Data** | |
| Sound Pressure Level |
133 dB(A)
|
| Sound Power Level |
139 dB(A)
|
| Instantaneous Sound Pressure Level |
131 dB(C)
|
| ** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614-2. | |
| + See the Nozzle Selection Guide for information on how to properly select the blast nozzle based on compressor pressure and flow output specifications. | |
Ønsker du mer infomasjon om EQs Elite?
Send inn kontakt informasjonen din her, så tar vi kontakt med deg.
Takk - din melding er motatt.
Vi vil komme tilbake til deg så snart vi har sett på den.