Graco ECOQUIP2

EQs2 Twinline

Utvikle produksjonen for store blåsejobber
EcoQuip EQ2 Twinline opererer på en kompressor med to dyser for å doble produksjonshastigheten, noe som gjør stor -jobbene mer lønnsomme.

Du trenger nå ikke å bekymre deg for å bringe to separate skid-enheter til jobb. Med den nye Twinline kan du nå ha to operatører som jobber av en maskin uten avbrudd.

EcoQuip EQs2 Twinline leveres komplett med:
2 x 6,5 kubikkmeter blast potter
Krasjramme og rustfritt stål i rustfritt stål
Vanndose ventil, trinn, media hylle, slange rack, luftinntak filter / kulventil og media filter sett
2 x 50 ft. Graco blastslange
2 x # 8 Graco høyytelsesdyser
2 x pneumatiske eller elektriske sprengningsregulatorer

 

EcoQuip 2 EQs2 Elite
Maximum Fluid Working Pressure
12.1 bar, 1.21 MPa
Operating Temperature
1.6˚ - 43.3˚ C
Recommended Compressor Size
10.6-45.3 m^3/min
Blast Hose Size
31.75 mm ID
Abrasive Capacity*
798 kg
Dry Weight
707.6 kg
Wet Weight*
1655.6 kg
Pressure Pot Volume
184 liters
Water Tank Volume
NA
Air Inlet Connection†
– – – – –
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense media will decrease weight.
† 2 in. ground boss adapter included in tool box (see Parts section of the EcoQuip 2 manual for more detail).
Air Supply Hose Minimum ID
185–600 CFM compressor and less than 100 ft. hose length
38 mm ID
Over 600 CFM compressor or greater than 100 ft. hose length
51 mm ID
Sound Data**
Sound Pressure Level
133 dB(A)
Sound Power Level
139 dB(A)
Instantaneous Sound Pressure Level
131 dB(C)
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614-2.